INSTEK GOM-802 REPAIR and INSTEK GOM-802 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the INSTEK GOM-802. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GOM-802 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our  used General Meter page

 
   INSTEK GOM-802   Description / Specification:    
INSTEK GOM-802 DC Milli-Ohm Meter

The GW Instek GOM-802 is a high precision programmable DC Milli-ohm meter suitable for the low resistance measurements of switches, relays, connectors, PCB tracks and variety of other devices. There are nine measurement ranges from 30 m-ohm to 3 M-ohm selected automatically or manually with the constant current between 1 µA and 1A, 0.05% high accuracy, 1 µ-ohm resolution and four terminals Kelvin connection to make a reliable and consistent test result. Specifications. Resistance Measurement 30000 counts (speed : 7 times/second) Range, ohms: 30 m, 300 m, 3, 30, 300, 3 k, 30 k, 300 k, 3 M. Maximum Resolution: 1µ-ohm. Measurement: Four-terminal method. Over input range: "OL" indication. Maximum Applied voltage: 30 m-ohm to 3 ohm range, 30 VpDC, other range 100 VpDC.



 

Standard Calibration $115.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GOM-802. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your INSTEK GOM-802 REPAIR and/or INSTEK GOM-802 DC Milli-Ohm Meter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: